I have an old Stanley miter box saw that has been in my family for years. Im cleaning out my garage and Honestly I dont use it. Its a nice heavy saw that would still be usable or for the person that just likes old tools. I am sure that this is worth alot more that $70 but I just need it gone.Please call or text913-306-6773 Location: legendsits NOT ok to contact this poster with services or other commercial interests

Old iron \"Sears\" scroll saw from probably the 40s in good working order. Heavy duty! all cast iron & big... this is not a craftsman/sears piece of plastic, but a serious saw. Best way to reach me is by phone 816-729-5060 Location: KC West bottomsits NOT ok to contact this poster with services or other commercial interests

Walker turner bench/table top drill press. Heavy duty, I replaced the motor from the original 3 phase with a Dayton. Good Drill press that Ive had for years, but just dont need two. Best way to reach me is by phone 816-729-5060 Location: KC west bottomsits NOT ok to contact this poster with services or other commercial interests

Power Kraft Lathe - I believe the size is 12x36. Includes chisels and bowl turning plate. Best way to reach me is by phone 816-729-5060 Location: KC West bottomsits NOT ok to contact this poster with services or other commercial interests

Rough looking but very powerful. 17\" floor buffer/stripper with pad driver and 3 pads included.Needs switch because it runs all the time. Ive just been unplugging it at the motor but that can be a bit of a trick on a slick floor. The switch is probably a $20 item.It is manufactured by Mercury.If this ad is still up then I still have it.John913-433-3982 Location: Merriamits NOT ok to contact this poster with services or other commercial interests

porter cable router 1 and 3/4 model #690lr heavy duty router. comes with a porter cable dove tail jig, over 40 router bits, depth gauges, extra base plates, and more. $ 600.00 worth of equipment for only $200.00 all in very good shape I just dont need it any more. call todd @ 816-258-0114. thank you for looking. Location: so kc moits NOT ok to contact this poster with services or other commercial interests

Campbell-Hausfeld 8 gal. twin tank air compressor. $250.00 Location: Independenceits NOT ok to contact this poster with services or other commercial interests

Slightly used. Near new condition. Retail value $229.95. A great deal at $125.00. Location: Independenceits NOT ok to contact this poster with services or other commercial interests

Superchute debris chute1 top hopper. Part # SC-WR-TH5-30. Retail value $300.00.10 wrap around sections. Part # SC-WRAP-30. Retail value $240.00 ea.This was only used on one small job. 5 of the wrap around sections have never had hardware on them.Total retail value is over $2700.00.A great deal at $1500.00. Location: Independenceits NOT ok to contact this poster with services or other commercial interests

runs rough but new rebuilt motor to go with it needs new tub bearings but have them to go with it as well might trade for a good riding mower $700 816-807-0545 Location: bates cityits NOT ok to contact this poster with services or other commercial interests

4 Qual-craft pump jacks and 4 top braces. These were only used on one small job. In near new condition.A great deal at $150.00 Location: Independenceits NOT ok to contact this poster with services or other commercial interests

Coleman maxa 5000/6250 watt generator, Runs good, Just serviced, Powered my whole house when needed. occasionally used. Greg 816-985-5579 Location: Inependenceits NOT ok to contact this poster with services or other commercial interests

Nice drill press no name on it works great asking $50.00 email chollow2074@yahoo.com Location: grandviewits NOT ok to contact this poster with services or other commercial interests

Used Dewalt DW716 Double bevel Compound miter saw with laser. $275.00 FIRM 816-918-8746printplace.com coupon Location: Kansas City, Northlandits NOT ok to contact this poster with services or other commercial interests

Dewalt angle grinder with 2 unused soft discs and 1 used grinding disc and a cutting blade asking $40.00 email chollow2074@yahoo.com Location: grandviewits NOT ok to contact this poster with services or other commercial interests

-Economical TENNSCO Steel Shelving stores your industrial, wholesale, or retail merchandise. -Extra strong 14-gauge uprights combine with 16-gauge shelf supports and 5/8\" thick particleboard shelves to give you 1000-lb. capacity per shelf (evenly distributed). -Shelves adjust easily in 1-1/2\" increments. Assembly is totally boltless—only a rubber mallet is required to snap the shelf supports into the uprights. -Can be assembled as a 4-shelf unit or as two separate units, cut post to size. Made in USA.Size 2 x 4 shelves, 84\" tallAll brand new only one assembled for picture.I only have 3 units left- $100 each, great price because theres no tax and no freight cost.816-228-7866Search my phone number for more building related items. Location: Grandviewits NOT ok to contact this poster with services or other commercial interests

2004 14 enclosed trailer, black with aluminum wheels. good condition. 785.766.3513 Location: overland parkits NOT ok to contact this poster with services or other commercial interests

Heres a pic. It IS BARELY used. Looks and runs Like NEWNOT of my exact one but it IS this cleansaw w/ case$80 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Heavy-Duty Deep Cut Variable Speed Band Saw Kit - D28770Kw/lightits been stightly used, Very strong unit. They sell for over $300. $150 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

I have one that is 3 1/4 and one 3 7/8 Location: Libertyits NOT ok to contact this poster with services or other commercial interests

This motor was installed on a compressor about 1 month before the compressor went out, so its had very little use. It is 3 phase. Location: Libertyits NOT ok to contact this poster with services or other commercial interests

Looks brand new. Hardly used, Davidson 300lb capacity. Brand new are over $250.00 Location: South Kansas Cityits NOT ok to contact this poster with services or other commercial interests

6 tool cases, 2 brand new in unopenned box, 4 used The size is 16\" x 12\" x 6\" Sell new at Time Motion Tools for $178.00$30.00 each for the used$60.00 each for the newCall 816-392-9862 Location: Lees Summit MOits NOT ok to contact this poster with services or other commercial interests

drill works great-batteries weak-816-405-2618 or 816-200-6333 Location: independenceits NOT ok to contact this poster with services or other commercial interests

816-405-2618 or 816-200-6333 Location: INDEPENDENCEits NOT ok to contact this poster with services or other commercial interests

12 in Ryobi miter saw with adjustable laser. Used very little. $125 Cash only. Call 816-734-9869 for more information. Location: Gladstoneits NOT ok to contact this poster with services or other commercial interests

For sale: Black & Decker 7-1/2\" Band Saw and Craftsman 15\" Scroll Saw with Sanding Pad Accessory Attachmentthey are for sale for $39 each.Black & Decker 7-1/2\" Band Saw :========================This saw is in a great working condition, blade is includedCuts up to 4\" wood7-1/2\" x 3-3/4\" Throat10\" Tilting Table adjust to 45degCraftsman 15\" Scroll Saw:==================This scroll saw is in a great working condition, comes with one blade and Sanding Pad Accessory AttachmentIts very convenient to have the sander attachments for it, so that you can do your craftworks all in one tool.Item can be picked up at my house near K10 & K7 (zip 66220), or meet around lenexa, olathe, gardner, or overland park Location: Lenexa, Olathe, Gardner, Overland Parkits NOT ok to contact this poster with services or other commercial interests

NEW \"CLARKE\" Hanging Shop Shelf (NO DOORS ) , BLACK with Four Shelves, 30\" Wide x 12\" Deep x 30 1/4\" Tall ASKING $35.00 CALL Mike @ 913-207-3472 Location: Pleasant Hill, MO.its NOT ok to contact this poster with services or other commercial interests

I have a Mac Tools Roller Cabinet Model MB4890A-GR that is about 2 years old. It measures 44\"long x 20\"deep x 40 1/2\" tall, has 10 drawers all with ball bearing slides. Comes with 2 keys, touch up paint, mat for top and all drawers have liners in them. The box is dark green and in very good condition! Sells new for $2600.00 but only asking $1400.00. OBO Call 816-223-1888 Location: Chillicothe Moits NOT ok to contact this poster with services or other commercial interests

Used, very good condition, comes with vacuum pump. Contact Bella @ 913-648-4836 Location: Overland Parkits NOT ok to contact this poster with services or other commercial interests

Decent Tool box needs some work on bottom drawer has some misc. tools some craftsman some off brand come take a lookKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Nice Tool bags Used For Rough in carpentryKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Nice drill press works great asking $50.00 email chollow2074@yahoo.com Location: grandviewits NOT ok to contact this poster with services or other commercial interests

Used very Little Hook and Loop TypeKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Lincoln arc welder with less than 10 hours welding time, comes with rolling casters under unit and 500-600 sticks of 7018 h4r welding rods and specialty rods for heavy pentrating welding816-215-3799 Location: blue springsits NOT ok to contact this poster with services or other commercial interests

2 hp 13 gallon air compressor. Missing a wheel but otherwise in great condition. Only used a couple of times. Location: Blue Springsits NOT ok to contact this poster with services or other commercial interests

THIS IS A ONAN 6500 WATT EMERALD PLUS GENSET GENERATOR. WE HAD IT IN A RACE TRAILER THAT WE SOLD AND THE BUYER DIDNT WANT THE GENERATOR.IT WILL RUN ON GASOLINE OR PROPANE, IT RUNS VERY SMOOTH AND PUTS OUT PLENTY OF POWER. IT COMES WITH A BRAND NEW MUFFLER AND A BRAND NEW REMOTE START WITH AN HOUR METER. THIS GENERATOR WILL RUN 2 AIR CONDITIONER AS WELL AS LIGHTS.MOVING SO THIS HAS TO GO THIS WEEKEND OR IM GONNA HAVE TO LOAD IT UP AND TAKE IT WITH ME...SELLS FOR OVER 5000.00 NEW THIS IS AN OLDER MODEL BUT VERY WELL WORTH THE MONEYTHANKS FOR LOOKING, JON816-694-7895 Location: ODESSA, MOits NOT ok to contact this poster with services or other commercial interests

Red Metal Gadget/Tool Box by Circulon21\" length, 4\" deep, 3\" heightGood quality, sturdy metal construction with lockable latch.New and unused, but a few small surface scratches.$8.00. Cash only please. Reply to email to contact. Location: Midtown KCits NOT ok to contact this poster with services or other commercial interests

This motor is new still in the box. The part number is CD6215. You should be able to get all the info by using the part number on google. Let me know if there are any questions. Location: northlandits NOT ok to contact this poster with services or other commercial interests

FREE Tai-manufactured 1/2\" 6-point socket for the asking. Ive got two but only need one. Throwing one away seems wasteful. Keeping both wastes my toolbox space. Its available for pick it up evenings & weekends near Grandview Road & Banister Road in south K.C. Weekdays its available near 87th & Lackman in Lenexa. Email if interested. Remember to recycle. Location: SKC/Lenexaits NOT ok to contact this poster with services or other commercial interests

I have this Heavy Duty Two Stage Deep Vacuum Pump made by the Thermal Engineering Company, Model# 1825Z, its 3.2CFM. I have used this reliably for years and believe me this thing will pump down a refrigerator in 1-2 minutes flat!!! I just upgraded to a smaller/lighter model that is easier for me to carry around. Im selling this one for 200.00 which if you have priced these i think is reasonable, but feel free to make a cash offer or maybe trade????? This pump still works great, I have always kept up on changing the oil and it shows in how well it still works. I also have this BRAND NEW still has yellow caps on ends, 50 feet of 1/4 inch copper tubing for 50 bucks. reply at 4aroberts@charter.net or call 660-441-4396 with all and any offers. never know what i might trade for or take, thanks and have a great day. Location: warrensburgits NOT ok to contact this poster with services or other commercial interests

This is a Craftsman 60 Gal. 6 HP Air Compressor. It works very well. It also comes with an air gauge and filter as well as a 25 reel of air hose.MUST SELL THIS WEEKEND, MOVING AND HAVE NO PLACE TO PACK IT,OUR LOSS IS YOUR GAIN...NO TRADES..CASH ONLY...THANKS, Jon816-694-7895 Location: ODESSA, MOits NOT ok to contact this poster with services or other commercial interests

Black & Decker Cordless 24 Volt 4 Tool Combo Kit, with 24 volt Drill, High Torque 6 1/2 inch Circular Saw, 24 Volt Flashlight, and Fast Charger, and Stud Sensor. this is brand new in the box, never opened, original seal. we got it for a gift and already had a saw so we never opened it. sells for $150 at lowes. you can have this set for $80. remember its 24 Volt, not 12 or 18.... and its cordless--its the good, powerful one! :-) let us know if ur intersted. thanks for looking. Location: Olathe-Blackbob and Santa Feits NOT ok to contact this poster with services or other commercial interests

Craftsman 96pc Tool Set. Number 33596 Location: Olathe, KSits NOT ok to contact this poster with services or other commercial interests

Two shop vacs, I think they both work. Might need a little tinkering with. They are my boyfriends and he recently bought a new bigger one. We just need these out of our way. Please email if interested. Location: Lees Summitits NOT ok to contact this poster with services or other commercial interests

Brand New 16\" Scroll Saw, Never Used. Owners Manual and accesories. Bench Top Pro. Model SS16 bevel angle scale, blade guard, table lock handle, quick release lever. Motor 1/10 HP, 120 Volt over 1600 RPM. Location: Overland parkits NOT ok to contact this poster with services or other commercial interests

I have a Like New, Excellant condition Central Pheumatic 21 Gallon Air Compressor. 4.5 peak hose power, 125 PSI Model #47065 - 2 Air gauges one for tank one for hose, stands 43\" tall rolls for easy transporting. $375.00 Local pickup only, Cash only. Hose not included, but you can use hose to test. Location: Overland Parkits NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

Air compressor, works fine older model but will do fine for general use. First $30 takes it... Location: Raytownits NOT ok to contact this poster with services or other commercial interests

FMC Brake Lathe Has Cutter for Both Brake Drums & Rotors, and necessary mounting adapters. Good Condition. 950. obo. 816/520-3650 Location: Blue Springsits NOT ok to contact this poster with services or other commercial interests

Not sure what they are for exactly....but can be used for counter ends or what ever.913-522-5419 Location: opits NOT ok to contact this poster with services or other commercial interests

Very good condition. Location: Kansas City, Ksits NOT ok to contact this poster with services or other commercial interests

24 ft wearner fiberglass extension ladder 300 lb load capacity call 816-540-6159 or 816-769-1512 ask for kevin Location: pleasant hillits NOT ok to contact this poster with services or other commercial interests

8 ft fiberglass werner step ladder 250 lb load capacity call Kevin 816-540-6159 or 816-769-1512 Location: pleasant hillits NOT ok to contact this poster with services or other commercial interests

PowerTig 200DX ***** SHIPPING INCLUDED!!! Category: IGBT AC & DC PULSE TIG ARC (MMA) Purpose: Multi-Purpose Welder + 200AMP PULSE Arc/Tig 1PH Technology: Robust Infineon (By Siemens) IGBT Power Drive Matrix Specifications Input voltage 230vac Input amps 32.1A(26A) Protection Intelligent Self Diagnostic No load voltage 70v Arc voltage TIG:18V SWAM:26.4V Tig Duty Cycle@240vac 100%@130a 60%@160a 35%@200a MMA duty cycle@240vac 100%@100a 60%@130a 35%@160a AC tig/pulse base current amp range 20~200a DC tig/pulse base current amp range 5~200a MMA/stick amp range 5~160a Pulse Feature Mode Off/On Switch AC pulse control frequency .5~25hz DC pulse control frequency (L/H) .5~25hz Pulse duty cycle/width ratio 10%~90% Base/Peak Ratio Adjustment Range Pulse Base current range 5~200a Pulse Peak/Base Amps Adjustment Method 1 Knob - Peak Amps 1 Knob - Base Amps AC balance control (wave/SP-cleaning/penetration) 30~70% AC square wave frequency control 20~100hz Gas Pre-flow Time Range 0.3s (fix) Gas Post-flow Time Range 1~25s Trigger Latch Modes 2T/4T 4T Mode - Initial (start) current dc-5a/ac-20a�5a 4T Mode - Current Up-slope Time 0~10s 4T Mode - Current Down-slope Time 0~10s 4T Mode-Crater current (finish down slope current) dc-5a/ac-20a�5a Spot Time Range none Hot start - stick/mma none Hot start - HF tig none Arc force (stick/mma) 0-10 Lift Arc (start arc w/o HF - interference) none Efficiency 83% Weight 25kg/55lbs Dimensions (L x W x H) 21 x 10 x 16 Richard 2 5 3- 951 - 1945 *** ALSO HAVE NEW PLASMA CUTTER AVAILABLE*** its NOT ok to contact this poster with services or other commercial interests

http://www.amazon.com/Wagner-Power-Products-503008-200-Watt/dp/B00004TUCV This item sells for $24 new, and mine has never even been taken out of the package. $10 OBO. E-mail me if you are interested. Location: Independenceits NOT ok to contact this poster with services or other commercial interests

Mettler Toledo DA-110 Handheld Portable Density/Specific Gravity Meter • Measurement accuracy to ±0.001g/cm3 and temperature accuracy to ±0.05°C • Temperatures range from 0 °C to 40°C or 32F to 104F If you look this up, there are many people who sell theirs (used) for around $1500! So $800 is a steal!! LADIES: YOUR HUSBANDS WOULD LOVE TO BE THE GUY WHO HAS THIS, SINCE NONE OF HIS FRIENDS WILL HAVE ONE! THIS IS A GREAT GIFT IDEA!! Location: Independenceits NOT ok to contact this poster with services or other commercial interests

I have a SPECTRA Precision Laser HD50 Handheld Distance Meter. I bought this new a year ago. I paid $200 for it. It works great! Im just selling it because I have no use for it anymore. Its functions are; Variable measurement functions, Length, Continuous measurement, Area, Volume, Remote length Pythogras throrem, Accuracy 1.5 mm (1/16 in). It has many more functions. Comes with a carrying case and an instruction book in orginal package. E-mail me if you are interested. This is a very good deal, and its going to go fast, so dont wait to make an offer. $100 or highest offer. http://www.amazon.com/Spectra-Precision-HD50-Handheld-Distance/dp/B000Q5U9JG Location: Independenceits NOT ok to contact this poster with services or other commercial interests

Authentic General Motors Accessories Hard Truck Bed CoverItem Number (Part number) #17802370 MSRP Price : 1,250.00To purchase separate: $1,137.50 Fits 2007- 2009. Silverado or Seairra standard short bed.GM accessories not after market, still has plastic protective on it. NEW: Perfect CondMADE IN THE UNITED STATES OF AMERICA!http://www.gmpartcatalog.com/partlocator/index.cfm?action=searchCatalogOEM&siteid=214551Call Stan at 816-838-8630495.00 OBOEverything to put the bed on comes with it. all hardware. Location: Lone Jackits NOT ok to contact this poster with services or other commercial interests

Jet Table Saw that was used to build a built-in entertainment center and then has been sitting in my garage ever since. Needs a home that will get some use out of it. Location: Shawneeits NOT ok to contact this poster with services or other commercial interests

We bought a new scroll saw and no longer need this one. Works great, we just bought a new several new power tools and no longer need the old. If interested contact wes at 816-261-7425 Location: North of St. Joseph MOits NOT ok to contact this poster with services or other commercial interests

Panduit Universal Crimp Tool for Opti-Crimp Location: LEES SUMMITits NOT ok to contact this poster with services or other commercial interests

We just bought a brand new table saw and no longer need old faithfull. Works great, we just wanted a new one that had a couple added features. If interested cantact me at 816-261-7425. Location: North of St. Josephits NOT ok to contact this poster with services or other commercial interests

Work Great. The motor is electric and is 1/2 hourse power. I think it has a 3.5 cubic feet mixing pot. The wheels work. Phone (816)-267-0931 $CASH ONLY$ Location: BUCKNER,MOits NOT ok to contact this poster with services or other commercial interests

Hi, I have this like new 4000 run watt/5000starting watt Generator made by Briggs and Stratton, with a B&S 6.5hp OHV engine. email or call 816-263-2828. Thanks Location: Lees Summitits NOT ok to contact this poster with services or other commercial interests

WEN 14 in. electric chainsaw. In great shape and runs great as well.Thanks for looking Location: Shawneeits NOT ok to contact this poster with services or other commercial interests

brand new toolbox with side box Location: op. ksits NOT ok to contact this poster with services or other commercial interests

perfect running tecumseh 10 hp Coleman 5000 watt generator -is missing air cleaner(NAPA auto parts less than $20) Must go asap-make offer-CASH ONLY Location: leessummitits NOT ok to contact this poster with services or other commercial interests

Milwaukee 18 Volt Ion Battery Cordless Drill and Impact Kit------$150.00 HomeLite Chainsaw 18\"------$80.00 with casePlease call Bob at 816-935-1486 Location: Independenceits NOT ok to contact this poster with services or other commercial interests

AN OLD TIME, HAND HELD AGRICULTURAL TOOL, WITH A 3 Ft CURVED BLADE AND A 5 Ft HANDLE; USED TO HARVEST GRAIN CROPS OR CUTTING GRASS FOR HAY..... ALSO USED AS A FATHER TIME COSTUME PROP FOR NEW YEARS PARTIES >........................................CALL AL @ (913) 638-8800 FOR MORE INFORMATION Location: Overland Park; KSits NOT ok to contact this poster with services or other commercial interests

******* NEED TOOLS ******* THIS IS THE PLACE TO BE ************ Call george 816 359-1050Best price in town 40 hwy by the i 70 drive in Location: kcmoits NOT ok to contact this poster with services or other commercial interests

12\" upright band saw, new 1/4 inch blade - will take many sizes of blades with the large wheels that it is equipped with. Internal spring gage, and cutting light. 1/2 HP engine Contact 816-224-8407 - ask for Terry - Location: Blue Springs, Mo its NOT ok to contact this poster with services or other commercial interests

Have a drop safe, brand is Hayman. Drop money from out side or another room and count it in another. 15 1/2in. wide, 20 1/2in. deep and 33in. tall. E-mail or call 816-985-5404. Location: Kansas City, Mo.its NOT ok to contact this poster with services or other commercial interests

Have a drop safe that is used in an auto. Anything that hauls money or collectables will be safer for you and your company. Cheep insurance. It measures 10 3/4in. wide, 10 3/4in. tall and 16in. long. e-mail or call 816-985-5404. Location: Kansas City, Mo.its NOT ok to contact this poster with services or other commercial interests

Have a engine crate that was used for transporting our race engines. E-mail or call 816-985-5404. Location: Kansas City, Mo.its NOT ok to contact this poster with services or other commercial interests